Men's Alpha Long Sleeve

Size Guide
Size
Color
1 item left

With feedback and testing of our ZERO HL jacket, we created a two-piece system jacket and mid-layer. This highly versatile combination covers an unmatched temperature and weather range, critical to riding here in New England, where summer rain showers in the 80’s can dip to -15F snow drifts in the dead of winter, we sought to minimize the number of pieces in our closet. Take the guesswork out of finding the ideal combination for the changing seasons with the Alpha System.

Inspired by alpine climbing and ski mountaineering, the Alpha Long Sleeve is designed as a mid-layer piece to extend the range of our jackets. Polartec’s Alpha Direct insulation is placed in strategic areas to maximize warmth without weight. The Alpha creates airspace on all leading panels (sleeves, chest, collar) to trap warm air. This construction allows for exceptional breathability and a quick dry layer through a wide range of temps and dynamic and highly aerobic riding.

The sides, back and lower sleeve are made from our Merino 210 - a merino fleece-backed fabric that’s exceptionally soft, thermoregulating and abrasion resistant thanks to the polyester face. A half zip keeps bulk and weight to a minimum and a slim silhouette allows enough room for a base layer, while fitting trim under the Ultralight Rain or Signature Softshell jackets. Three back pockets promise real storage capacity for long base miles.

MERRY & BRIGHT

Now through December 25 - for every €200 spent you'll receive a free €40 Gift Card.

Gift Cards will be automatically emailed to you after your purchase.

Not valid with some promo codes. Cards expire 3/1/20.


    • Polartec® Alpha® Direct insulation leading panels for warmth without weight
    • Merino 210 back/sides - slim fit and thermoregulating
    • YKK Vislon Half zip
    • Three back pockets with silicone waist gripper
    • Extended collar
    • Slim fit to be worn in conjunction with Rain or Softshell jackets to extend their range well below freezing
  • Composition:
    • 100% Polyester - 63% recycled
    Made in: Italy
  • Caring for your cycling gear properly will extend its life and maintain its performance, fit and quality. It’s important to consider these instructions carefully. While we stand behind the quality of our apparel, not adhering to these instructions will void our warranty against manufacturing & defects.

    We strongly recommend washing your new gear before wearing it. You’ll find that your apparel will soften, and fit & comfort will improve after washing - especially with bibs & shorts.

    Machine wash cool, 86°F (30°C) with like colors: Cooler temps maintain better longevity for your apparel. Like colors, especially lights, will remain more vibrant when washed with like colors.

    Use mild detergent. Do not bleach or dry clean: Strong detergents & bleach can break down the fibers and elastane in the garment, dramatically reducing its life.

    Close all fastenings: this goes also for other garments mixed in with your cycling apparel. Velcro closures or clasps can catch on stitching or trim and damage your garments.

    Lay flat to dry. Do not tumble dry: Do not put your cycling apparel in the dryer. Even on low heat. Don’t do it. Heat can damage fabric, elastic and heat transfer logos very easily. Lycra (Elastane) is used throughout our garments to provide compression and support and is susceptible to damage from heat and can irreparably damage your apparel.

velocio ZUPER 4313
velocio ZUPER 12497velocio ZUPER 4904

Men's Fit & Sizing

Velocio fit is designed for comfort and performance. Starting with a form-fit silhouette, we've developed our men's-specific patterns from the ground up to compliment a wide range of body types and riding styles. All of our apparel is tailored for on-bike fit to ensure optimal muscle support and range of motion while riding. You may find certain aspects of our garments to seem "off" while standing, yet once you start pedaling these points disappear. 

Velocio bibs and shorts are made from highly compressive performance fabric for excellent support through an athletic fit. They will feel small when you first put them on and will often require washing and a few rides for them to "break in." We strongly believe in the benefits of compression - both in its performance benefits, as well as in its long-distance comfort - and we've designed all of our bibs with this in mind.

Our jersey fit is a slim form-fit cut designed to provide light compression and muscle support, exceptional comfort and a streamlined look. For 2019, we’ve made some adjustments to our sizing to allow for more flexibility in fit across a broader range of body types and preferences. Our larger sizes have be re-proportioned while maintaining a tailored look.


 

Taking your measurements

Chest - Start by placing a measuring tape around the largest part of your chest. The tape should be flat but not too snug.

Waist - Your natural waist lies between your bottom ribs and hip bones, close to the navel. To measure, breathe deeply, relax your stomach and lie the tape measure flat around your waist, allowing for a ¼ inch of slack.

Hip - Measured around the widest point of your hips.


Model measurements - Shown wearing size M.

Height: 5’11” (181cm)
Weight: 175lbs (79kg)
Chest: 38” (97cm)
Waist: 32” (81cm)

  • Size Chest Waist Hip
    XS 33 - 35 27 - 29 34 - 36
    S 35 - 37 29 - 31 36 - 38
    M 37 - 39.5 31 - 33.5 38 - 40.5
    L 39.5 - 42.5 33.5 - 36 40.5 - 43
    XL 42.5 - 45 36 - 38.5 43 - 45.5
    XXL 45 - 48 38.5 - 42 45.5 - 48
    XXXL 48 - 51 42 - 45.5 48 - 50.5
  • Size Chest Waist Hip
    XS 84 - 89 69 - 74 86 - 91
    S 89 - 94 74 - 79 91 - 97
    M 94 - 100 79 - 85 97 - 103
    L 100 - 108 85 - 91 103 - 109
    XL 108 - 114 91 - 98 109 - 116
    XXL 114 - 122 98 - 107 116 - 122
    XXXL 122 - 130 107 - 116 122 - 128